Logging In:
​Fill in your first name, last name, and email address in the box on the right side of your screen. Then press “Login”.

​Getting Connected:
​After logging into the presenter console & depending on the configuration of your event.

You may receive the below prompt acknowledging consent for the use of your Webcam & Microphone. Simply click "Agree" to complete the automated connection steps.

Immediately when you log in you will see a screen that looks very similar to this:

Navigating to the top right of the page will allow you to choose your primary connection method. Choosing to connect either by Phone dial-in, or Computer with the use of your Webcam and Microphone.

When choosing "Computer" you should expect this prompt to disappear, only for a few seconds, as webinar.net scans for any available webcam or microphone connected to your computer.
​
Once this scan is complete, the prompt seen below will appear for you to select an option:
​
"Audio Only" - Only your computer's microphone will be used.
"Use Camera" - Connect using both your camera and microphone.

Note: Even if you are not presenting with a Camera, if others are, we strongly suggest you select the “Use Camera” option, so that you can see other presenter webcams. If you select “Audio Only” you will still be able to hear them but not see their Camera, even if they have them on.
​

Once completed the connection steps, you can click "view presenters" -
where you may see all the other presenters at the event, with their camera and audio controls.

Please note your camera will remain muted when you log in.
If you are joining for the first time, or connectivity is lost during the presentation, you won't interrupt any other presenters who could be speaking at the time, allowing you to reconnect seamlessly.
​
Once you are fully connected the media player box will appear on the top left of your screen. If there are other presenters logged in and talking, or if the presentation is live, you should see speakers in that box. If there is no one logged in/speaking, the box will show as seen below.

Returning to the top right, you will see the mute controls of both your camera and audio

Unmute your audio by clicking on the icon for the microphone as seen below.
You will know your audio is being picked up correctly when the blue waveform bounces with your voice

​

When activating your camera, click the camera icon, this message will appear confirming you want to broadcast your camera to the audience:

Once you click yes, you should be able to see yourself in the top left media player.
If everything is working, congratulations, there are no more steps required for you to connect!

Connecting Via Phone & Backup Connections.

If you would like to connect & present via phone, or your webcast producer has advised you need to use a backup connection. Follow these steps to dial in and present your event over the phone.

If you are already connected via Computer/Camera you may need to "hang up" and connect again:
​

This time select Phone:

You will see a box with different countries & dial-ins, select the location and numbers closest to your local calling area. Be sure to take note of the Webinar number and Presenter code required for entry upon dialing in.
​

Here are the system requirements needed to use the Presenter Console.

For the best experience, we recommend using the latest version of the web browser you are attempting to use.
​

When your device is on minimal hardware requirements, it is recommended to mute the camera and avoid screen sharing.
​

When you need to do screen sharing, the recommended RAM is 8GB or above.
​

To use virtual backgrounds, your system must fit the following requirements:

For further assistance, contact us through chat or send us an email at support@webinar.net.